GAS-SERVEI, S.A. may use cookies on certain pages of the website, which are small data files generated on the user's computer which allow the system to remember the user's navigation preferences. These cookies are not invasive or harmful, nor contain personal data. The non acceptance of these cookies from your browser may prevent access to certain services from the website.
Cerrar | Cookies policy

Flushing AC/R systems

Our Flushing fluids are powerful degreasers that readily dissolve oil, tar, residual liquid, grime, sludge, impurities, heavy particles and other contaminants.

How do they work?

Errecom Flushing Fluids are designed to be injected under pressure into system components. The fast acting solvents lift particles and contaminants and drive them out. With the system under vacuum any residue will quickly evaporate.


Traditional flushing agents evaporate slowly and therefore can easily become trapped within the system, forcing long delays in evacuation. Furthermore, oil based flushing fluids tend to leave “oily” residues that mix with refrigerants, producing uncertain results. Our innovatory flushing fluids have the following benefits:

•  Residue-free

• Vigorous cleaning

• Quick and complete evaporation

• Fast-drying - evaporating from the system within minutes without residue

• Speedy repairs - saving time and money

• Compatible with A/C system components (metal and rubber)

• Effective.  


Flushing is essential to remove any impurities so the A/C system can function properly and work efficiently, especially after a compressor burn-out or component failure or accident. For quality repairs, it is vital to clean an A/C system prior to charging with coolant in order to:

• Eliminate any solid contaminants remaining from normal wear, accident or compressor failure, etc;

• Guarantee that refrigerant properties are not altered by any residual oils, improper flushing agents or other contaminants.

When systems are properly cleaned and evacuated, it reduces the risk of premature system failures.


Flushing Fluid for small AC/R systems. 

• Available: 1 lt (0,8 kg - 1,76 lbs) o 5 lt (4 kg ó 8,8 lbs). 

• Flammable.

Super Flush

Flushing Fluid for AC/R systems. 

• Available: 1 lt (0,8 kg - 1,76 lbs) o 5 lt (4 kg ó 8,8 lbs). 

• Non flammable.


Fast-Flush is the most direct, safe and simple solution to flush small Refrigeration Lines and Air Conditioning and Refrigeration System Components.

How does it work?

The Aerosol can is highly pressurised with CO2 to powerfully propel the Belnet flushing fluid at speed. Could be used either with the special Flushing Gun/Hose or directly with the special Rubber Cone.


• Ready to use.

• High flushing pressure 8-9 bar (116-130 psi).

• High pressure until empty - 3 bar (43.5 psi) at the last drop!

• No additional equipment needed. 

• Treatment to be followed with Nitrogen gas flush.

Flush Pump

Flush Pump is a cost effective flushing system for large Air-Conditioning and Refrigeration Systems.


• Power Supply: 230/240 V – 50/60 Hz.

• Pump capacity: 14 l/min.

• Maximum pump power: 0.75 Kw.

• Maximum pump pressure: 0.45 MPa.

• EPDM mechanical pump gaskets.

• 2.5m Flexible hoses with female 1/4 SAE connections.

• Interchangeable connections: 1/4 SAE -3/8 SAE- 1/2 SAE (2 of each type).

•  Storage and travel case.

Easy Pass

A simple kit for quick connection of two refrigeration hoses to enable complete flushing of HVAC&R systems.


Economical A/C flushing equipment

•  Ball valve.

• 1/4" Female connection.

• Volume: 750 ml.

• Length of hose: 60 cm.