Mini-Condensate pump with duct with duct with a 3-level float switch sensor for air conditioners up to 7.5 kW.
The EE1200K has particularly been designed for direct installation into the Eckerle-duct-system. Equal to the other volumetric systems of Eckerle the EE1200K comes with a high quality Swiss made piston pump inside. These pumps were specially developed to deliver condensate water. They offer wide opening duck-bill-valves (non-sensitive against water borne contaminants) and further-more they run
remarkably quiet. These design and component features ensure a pump system with a long life expectancy. They provide a higher-than-average performance even at great delivery heights.This float type pump is used in conjunction with air conditioners which have condensate collection tanks with an outlet on the drainage pipework: Cassette, ceiling unit, split, fan convectors.
The EE1200K comes in a set with a duct, an elbow, a ceiling seal and installation accessories. On request a special moulded foam part is available for different duct brands. This provides an easy mounting into pre-existing ducts.
• Electrical spec. 230 V, 50 / 60 Hz, 8 W
• Max. flow rate: 8 l/h.
• Max. delivery height: 6 m.
• Cable duct dimensions (L x W x H): 800 x 80 x 60 mm.
• Alarm switch: 230 V/ 8 A (ohmic load)
NO/NC (normally open/normally closed).
• Duct colour: RAL9016 (traffic white).
Impervious to blockage or contamination due to unique valve design.
Eckerle offers you two different pump systems:
1. Electromagnetic pump:
Usually found in two-part systems or split-systems such as the EE600, EE1000, EE1800, E1200 and EE1750, but also used in certain tank pumps such as the EE1650 in order to achieve higher lifting heights. Most Eckerle electromagnetic pumps have non return “duckbill valves”, whose large bore ensure that they are significantly less sensitive to dirt.
2. Centrifugal pump:
Almost all tank pumps are equipped with this robust technology, for example the EE150, EE300 and the EE400. The main features of this volumetrically wide-open displacement device are its high displacement volumes and insensitivity to dirt. Special encapsulated versions with a higher protection rating – like the EE400M/EE400 – can be operated in tough environments with high humidity levels and
with media that is far from the PH neutral range.