GAS-SERVEI, S.A. may use cookies on certain pages of the website, which are small data files generated on the user's computer which allow the system to remember the user's navigation preferences. These cookies are not invasive or harmful, nor contain personal data. The non acceptance of these cookies from your browser may prevent access to certain services from the website.
Cerrar X

EFC2

Fan Controller. Intelligent control

Usage

The EFC Fan Controller is suitable for all air cooled condensing units in air conditioning and refrigeration units with fan motor max. currents up to 2A resp. 4A (ohmic load).

Description

The controller provides not only the correct speed for the outdoor fan, it also determines whether the fan should stop and for how long, to give an optimum control to the system. Furthermore the control prevents over condensing even with outdoor temperatures down to -20°C and no iced-up Indoor coils. Due to decreased compressor running time, a higher efficiency will be achieved.

FEATURES

Technical data:

• EFC4A (L x W x H): 123 x 29 x 33 mm.

• Electrical spec.: 230 V, 50 Hz.

• Electrical load: Fan Motor max. current 2A/4A (ohmic load).

• Regulation: Phase modulation according sensor temperature and set point 0% or 40% to 100%
• at 0%, the fan is off
• at 40%, the fan speed is minimum
• at 100%, the fan speed is maximum.

• Sensor: Fixation with mounted releasable tie cable length approx. 1 m ends with caps.

MANUFACTURER

Eckerle
NOTES

Technical data:

• EFC4A (L x W x H): 123 x 29 x 33 mm.

• Electrical spec.: 230 V, 50 Hz.

• Electrical load: Fan Motor max. current 2A/4A (ohmic load).

• Regulation: Phase modulation according sensor temperature and set point 0% or 40% to 100%
• at 0%, the fan is off
• at 40%, the fan speed is minimum
• at 100%, the fan speed is maximum.

• Sensor: Fixation with mounted releasable tie cable length approx. 1 m ends with caps.